From the jar to the treatment system.
Six steps to prepare and apply BIOFOX 25 g. Use chlorine-free water throughout.
- 01
Jar + 1 litre of water
Add the contents of one 25 g BIOFOX jar to 1 litre of chlorine-free water.
- 02
Mix thoroughly
Stir with a mixing stick to disperse the product in the water.
- 03
Prepare the working solution
Dilute the prepared solution in 5 litres of chlorine-free water. For cesspits, the video guide specifies 10–30 litres of water.
- 04
Stir again
Stir the working solution thoroughly in the larger container.
- 05
Allow the solution to rest
Leave the working solution for 12 hours in a cool place at 15–20 °C.
- 06
Apply the required dose
Apply the working solution gradually using the programme for your site. We help select the product quantity and application frequency.
One capsule — 25 g.
Septic and on-site treatment systems
up to 15m³/day
Daily wastewater flow
Cesspits
up to 25m³
Contents volume
Ponds and water bodies
up to 50m³
Water volume
These figures describe a minimum product quantity. Initial site condition and contamination may require a higher dose. The septic-system figure is daily wastewater flow, not tank volume. Contact us to confirm the product quantity and application schedule.